 System Features Here is an overview of some of the features MazaCAM offers to Mazak users. Please call the number below to receive literature on all of MazaCAMs's capabilities, or to receive a demonstration to see how MazaCAM can significantly increase your shop's efficiency. |
| UPLOAD & DOWNLOAD PROGRAMS | Upload and download Mazatrol programs to and from the Mazatrol control, using MazaCAM's communications features. Thus, you can store existing Mazatrol programs on your PC's hard drive for later use and keep your control's memory freed up. | |
| MAZATROL EDITING & DATA ENTRY | Using the Mazatrol Off-line Editor, write new Mazatrol programs from scratch, or edit existing ones on your own PC or laptop. | |
| CONVERT CAD TO MAZATROL AND G-CODE | Convert popular CAD formats, such as DXF, IGES, and CADL formats to Mazatrol and G-Code. NOTE: The G-Code generated by MazaCAM is post-processed to output edit-free G-Code for specific controls (such as Fanuc, Yasnac, Mazatrol EIA, Okuma OSP, etc.). | |
| DRAW NEW, OR EDIT EXISTING CAD FILES | Draw CAD files from scratch, or edit existing ones with a full featured CAD system and then output those to Mazatrol and G-Code. | |
| PROGRAM A PART ONCE AND OUTPUT TO BOTH G-CODE AND MAZATROL. | Don't waste time by double programming your parts. Just program your part once, and then output both G-Code and Mazatrol. This alone saves large amounts of programming time. | |
| CONVERT MAZATROL TO G-CODE | Take existing Mazatrol programs, or write new ones, and simply convert them to G-Code, post-processed to output edit-free G-Code. This can be Mazak EIA/ISO or any other G-Code controls, such as Okuma OSP, Fadal, Fanuc, etc. See our diagram that illustrates this. | |
| WORKS WITH MOST MAZATROL CONTROLS. | Supports the broad line of Mazak controls
(including T1, T2, M2, T3, T32, M32, T+, M+, Fusion-640M, Fusion-640T, Fusion-640MT, Fusion-640MT-Pro, Matrix) from the early T1 to modern Nexus and e-Machine -- call for details. |
|
| CONVERT MAZATROL PROGRAMS BETWEEN CONTROL KINDS. | You can even convert your existing Mazatrol program from one generation to another whether old or new. Make your newer Mazaks upwards and backwards compatible. MazaCAM will convert newer Mazak’s programs to old ones or vice versa for both Mills and Lathes. For example: take your existing T1 Mazatrol program and convert to a Matrix-T, or your T3 Integrex program and convert it to your Matrix e-Machine. | |
| PRINT MAZATROL PROGRAMS | MazaCAM lets you print out your Mazatrol programs for easy reference. | |
| GEOMETRY SIMPLIFICATION | The Mazatrol language is not capable of using splines, so when dealing with DXF and IGES files that contain splines, MazaCAM can automatically convert splines to lines and arcs so that these two can be converted to Mazatrol. | |
| BACKPLOT MAZATROL TO AN EDITABLE CAD FILE | Take existing Mazatrol files and backplot them to an editable CAD file. This also automatically imports all tool data. |
For
more detailed information, please call SolutionWare Corp. at 408-249-1529 or toll-free at
888-322-3226 for free literature. |
| [ Top of Page | Home | Contact
Us | FAQs | What is MazaCAM? |
Features | Off-line Editor ] Copyright © 2008 by SolutionWare Corporation. All rights reserved. Geopath and MazaCAM are trademarks owned by Basic NC. Windows, Windows98 and WindowsNT are trademarks owned by Microsoft Corporation. Novell is a trademark of Novell, Inc. Mazak and Mazatrol are trademarks owned by Yamazaki Mazak Corporation. All other trademarks are the property of their respective owners |
